• With quality and scrupulous works in the industrial sector of plastic raw material for long years and also loyal to the principle of customer satisfaction in real sense, it feels right proud of having a young, dynamic and professional team that assures its constant achievement.

    Alfa İnovasyon

    With quality and scrupulous works in the industrial sector of plastic raw material for long years and also loyal to the principle of customer satisfaction in real sense, it feels right proud of having a young, dynamic and professional team that assures its constant achievement.

    Corporate News

    Hoping you may like new design of our website, we kindly remind you that we are open to any comments and recommendations of you in this process of renewal that has started right from our main page.You may have access to us from the communications section and thank you in advance for your kind interest and support.

    Human Resources

    If you desire to be one of the members of Alfa family, you may send your CV to ik@alfaplastik.com.tr to apply for General Position for evaluation in case of any vacancy.

  • İnsan Kaynakları

    Yıllardır plastik hammadde sektöründe, kaliteli ve titiz çalışmaları, aynı zamanda müşteri memnuniyeti ilkesine gerçek anlamıyla sadık kalıp, başarısının sürekliliğini sağlayan genç, dinamik ve profesyonel bir ekibe sahip olmanın haklı gururunu yaşamaktadır.

    Alfa ailesinin bir ferdi olmayı istiyorsanız, doğabilecek pozisyonlarda değerlendirilmek üzere, Genel Pozisyon başvurularınız için CV'lerinizi ik@alfaplastik.com.tr adresine gönderebilirsiniz.

  • Kurumsal Haberler

    Web sitemizin yeni tasarımını beğeneceğinizi umuyor, ana sayfamızdan başlayan bu yenilenme sürecince tüm görüş ve önerilerinize açık olduğumuzu hatırlatıyoruz. İletişim bölümünden bizlere ulaşabilirsiniz. İlginiz ve desteğiniz için şimdiden teşekkür ederiz.

  • Alfa İnovasyon

    Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi.

  • Alfa Polimer İnovasyon Plastik San. Ve Tic. A.Ş. was established in Çayırova, Kocaeli to produce plastic compounds.

    Having an annual capacity of 30,000 tons, our company is a solution partner of our prestigious customers by combining the modern technology it uses with its employees well-experienced in their specific field for more than 15 years.

    Alfa Polimer always aims at constant improvement basing on its fully-equipped laboratory and high R&D capability.

  • STRENGTH AND ELASTICITY TESTS :
    Prepared by taking into consideration the values specified in the standard ISO 527, the samples are elongated by draw with a constant load and speed by use of Zwick/Roell Z020. Tensile Elongation at Yield, Tensile Strength at Yield, Tensile Strength at Break and Tensile Elongation at Break are read.
    In the flexural strength, the material is forced to bend in a certain speed under a fixed load and the strength and elongation it shows are recorded at the moment.

    TEST FOR DETERMINATION OF THE MELT FLOW INDEX:
    Melt flow index of the plastic molten under a certain pressure and temperature is determined in gr/10 minutes by Zwick/Roell Mflow as per the standard ISO 1133.

    DIFFERENTIAL SCANNING CALORIMETRY (DSC) TEST:
    It is formed by placing DSC single heater and temperature sensor together with the sample and reference trays in the same furnace. The sample and reference are placed in the specific place and heated up to the predefined heating (or cooling) values. In case any change of state is observed with the sample, a temperature difference occurs between the reference and sample. The sample is heated until the temperature difference between the sample and reference terminates. Temperature difference (?t) or signal is converted to heat flux balance and a graphic is generated by it versus temperature and time. In addition to the principle of Heat Flux, Tzero technology of the equipment allows 4-term and precise measurements, instead of single-term calculation.

    GLOW WIRE TEST EQUIPMENT :

    COLOR VALUE MEASUREMENT TEST:
    By help of KONICA-MINOLTA 3600a Color Spectrophotometer, the measurements of the colors black- white, red-green and yellow-blue and their closeness to the target values are expressed by the values of L. a and b.

    MOISTURE TESTS :
    It is based on determination of the moisture content of the sample, in form of granular or printed part, by percentage by using Mettler Toledo HR83 Halogen equipment as per the test standard ISO 62.

    IZOD IMPACT STRENGTH TEST WITH NOTCH:
    Test bars, prepared as per the standard ISO 180/1A, are notched by use of Zwick/Roell HIT5 5P in accordance with the said standard to make them subject to some impact in order to determine the impact strength in kj/m2.

    IZOD IMPACT STRENGTH TEST WITHOUT NOTCH :
    Test bars, prepared without notch as per the standard ISO 180/1U, are made subject to some impact by use of Zwick/Roell HIT5 5P in order to determine the impact strength in kj/m2.

    CHARPY IMPACT STRENGTH TEST WITH NOTCH:
    Test bars, prepared as per the standard ISO 180/1A, are notched by use of Zwick/Roell HIT5 5P in accordance with the said standard to make them subject to some impact in order to determine the impact strength in kj/m2.

    CHARPY IMPACT STRENGTH TEST WITHOUT NOTCH :
    Test bars without notch, prepared as per the standard ISO 179/1U, are made subject to some impact by use of the test equipment Zwick/Roell HIT5 5P in order to determine the impact strength in kj/m2.

    DENSITY TEST :
    Weight of the plastic raw material or product in the liquid medium in which they are placed are measured by help of precision balance, AND GR200, as per ISO 1183 to determine the density of the material.

    TEST FOR DETERMINATION OF CONTENT RATE :
    Filling amount of the compound produced is determined by use of the test equipment PROTHERM PLF 110/6 by incinerating in the muffle furnace.

    SHORE HARDNESS TEST :
    Hardness of the thermoplastic materials is measured related to Shore D hardness by use of the test equipment Zwick/Roell as per the test standard ISO 868.

  • Alfa Polimer İnovasyon uses a various types of resins and fillings to provide high level structural characteristics to offer its customers the most efficient engineering solutions. These materials are designed in accordance with the most challenging production and service applications.

    You may call us at +90 (0262) 743 12 80 or send e-mail to info@alfaplastik.com.tr for quick access to the product you need among our wide range of products.

  • Contact Form

    Contact form submitted!
    We will be in touch soon.
  • IRAN OFFICE

    SHERKAT AZARVAN
    311 ASSADANI AVE. (YOUSEFABAD),
    3rd FLOOR, UNIT 6 TEHRAN , IRAN
    Postal Code: 14346-64437
    Phone: +98 21 880 61 838
    Fax: +98 21 880 62 940
    www.azarvan.com

  • GERMANY OFFICE

    Alfa Plastik GmbH
    Wilhelm-Stein-Weg 2
    D-22339 Hamburg
    Phone: +49 (0)40 / 65912898
    Fax: +49 (0)40 / 65912950
    E-Mail: info@alfaplastik.de
    www.alfaplastik.de

  • USA OFFICE


    29 BRODWAY SUITE 1501,
    NY 10006 NEW YORK - USA
    Phone: +1 (212) 742 01 52
    Fax: +1 (212) 742 01 78
    www.alfaplastik.com.tr

  • SINGAPORE OFFICE


    100 BEACH ROAD SHAW TOWER,
    #28-04 189702 SINGAPORE
    Phone: +65 629 53 629
    Fax: +65 629 51 883
    www.alfaplastik.com.tr